SAB-6006 - Addressable sounder beacon

Overwiew

The SAB-6006 addressable Sounder Beacon is designed for acoustic and optical fire signaling by voice. They can operate only on addressable lines/loops of POLON 3000/4000/6000 fire alarm control panels. They are switched on on the command sent by the control panel, when the programmed triggering criteria are met, e.g. when a fire is detected in the selected supervisory zone, general alarm in the control panel.

The component requires the presence of two supply voltages at the same time for proper operation:
– from the detection line
– From an external power supply.

Design

The essential part of the siren is a piezoelectric transducer used to produce an acoustic signal and an LED with a lens located on the top of the siren. The entire unit is mounted in a housing similar to the Series 40 detector. To mount the siren on the ceiling or wall, use the G-40S socket made of flame retardant plastic, supplied with the siren. There is a screwless terminals connector for connecting the installation wires which is placed in the socket The connector has six terminals, two pairs labeled “+” and “-” as the input and output of the supervisory line and two terminals for connecting an external 24 V power supply.