SAW-6102 - Conventional acoustic sounder

Overview

Conventional acoustic sounders SAW-6101 are designed for acoustic signalization of fire with tones. There is a possibility of acoustic synchronization of several sounder working in one acoustic area. They are dedicated for operation with all type of control panels with appropriate power supply output.

Design

Electronic circuits with piezoelectric sounder are fitted into red housing made with flame retardant material. The sounder is installed in G-40S base which is made with the same material and which is a kit with the sounder. There is a screwless connector inside the base for connection of wires. There is six connectors: two for power supply cable, synchronization and two for optional external switch for switching off the sounder.

Description of operation

When supply voltage is applied to the alarm device’s terminals, the SAW-6102 will enter the alarm state and play the sound pattern selected during configuration while flashing red LEDs cyclically and monitoring the state of the synchronization line to maintain synchronization with other alarm devices in the network.

The device operation mode is set using a sliding switch consisting of eight sections for selecting tone, volume, volume ramping and synchronization. If the SAW-6102 is to cooperate with SAW-6101 , the identical tone number should be configured in the SAW-6101 siren and the tone duration should be set to Tsynch according to the table in the siren installation manual.
Master/Slave switch in SAW-6102 must be switched off.