UCS 6000 from 32A up to 64A - Universal control panel

The UCS 6000 universal control panel is designed to activate fire-fighting devices used for gravitational and mechanical smoke extraction (smoke ventilation dampers, shut-off dampers) and enables:

• Fire (smoke) detection;
• Activation of fire-fighting devices installed in smoke extraction systems (automatic or manual)
• Accoustic and optical device operating states signalling (alarm, fault);
• Automatic control of fire protection and actuators (actuators, electromagnets, fans, etc.) of the smoke extraction system;
• Automatic conduct of the control panel’s own systems and circuits;
• Providing basic information to main control panels (e.g. POLON 4000 , POLON 6000, POLON 3000, IGNIS 1000  or others) regarding alarms, faults, condition of fire protection and actuator equipment.

The UCS 6000 control panel can operate individually as a single or multi-zone universal smoke extraction controller or in addressable detection lines/loops of the POLON 4000 and POLON 6000 system fire alarm control panels.

Control panel modules:

MGS-60 module

• a supervised line receiving the alarm signal from an external fire alarm control panel,
• a rain and/or wind sensor supply line,
• a rain and/or wind sensor signal receiving line,
• the supervised PKA alarm relay (continuity of wire), the PKU fault relay.

MGL-60 Module

• conventional detector line (40 model range detectors),
• conventional line for manual smoke exhaust call points ( PO-6X model range manual call points),
• Control and supply universal supervised main output for fire protection devices (servomotors of fire/smoke dampers, electromagnets of fire zones separators, etc.),
• Status of limit switches control lines of fire protection devices controlled and powered by the main output,
• lines receiving signals from ventilation push buttons (OPEN, CLOSE);

MPW-60 Module:

• PK1 and PK2 high voltage type programmable relays (5 A/ 230 V)
• 2 supervised programmable LK1 and LK2 (24 V) monitoring lines;

MPD-60 module:

• 2 supervised, programmable relays PK1 and PK2 (1 A / 24 V),
• 2 supervised programmable LK1 and LK2 (24 V) monitoring lines;

MKA-60 Module :

• POLON 4000 communication line (addressable detector line);

MZU-60 Module:

• supply fault relay – PKUZ (1 A / 24 V)
• External devices supply supervised output (0.5 A / 24 V).