PZB 6000 - Fire protection power supply

PZB 6000 fire protection power supply is designed for wireless power supply of devices used as part of fire alarm systems as well as fire and executive devices – as part of smoke prevention systems.

The PZB 6000 fire protection power supply is designed for wireless power supply of devices used as part of fire alarm systems as well as fire and executive devices – as part of smoke prevention systems. It is recommended for devices requiring a stable supply voltage of 24 V DC powering.

Each power supply offers four voltage outputs with a maximum continuous load current of 14 A and a short-term load of 20 A depending on variant.

The insulation of the circuits supplying the 230 V / 50 Hz power grid is reinforced and withstands the test voltage of 2800 V. The insulation of the low-voltage circuits (below 42 V) withstands the test voltage of 700 V AC.T he mains connection should be protected with a factory cover when power grid wires connected.

specifikáció:
  • Supply voltage (main) 230 V
  • Supply voltage (back-up) in M70 enclosure 2 x 12 V 18 Ah
  • Supply voltage (back-up) in M71 enclosure 2 x 12 V 40 Ah
  • Supply voltage (back-up) in M72 enclosure 2 x 12 V 80 Ah
  • Supply voltage (back-up) in M72 + M73 enclosure 2 x 12 V 134 Ah
  • Maximum mains current consumption for MZ-61-75 power module (75 W) 0,85 A
  • Maximum mains current consumption for MZ-61-150 power module (150 W) 1,6 A
  • Maximum mains current consumption for MZ-61-300 power module (300 W) 2 A
  • Maximum mains current consumption for MZ-61-600 power module (600 W) 4,1 A
  • potential-free relay outputs 2
  • Number of detection lines 2
  • Signaling lines (potential) 4
  • Operating temperature range -5 °C to +40 °C
  • M70 Enclosure dimensions: 444 x 434 x 112,5 mm
  • M71 Enclosure dimensions: 444 x 444,5 x 197,5 mm
  • M72 Enclosure dimensions: 554 x 503,5 x 217,5 mm
  • M73 Enclosure dimensions: 354 x 503,5 x 217,5 mm