CDG 6000-16 - Gas detection control panel (16 channels)

The CDG 6000 addressable gas detection panel is designed to detect and signal the leakage of combustible gases and dangerous concentrations of carbon monoxide, after receiving information from gas detectors cooperating with it. The control panel can work with up to 16 addressable gas detectors of the PSG-6000 type. The control panel has relay outputs to control external devices, a special gas shut-off valve control output and control inputs.

The CDG 6000 gas detection control panel enables:
• control and signal the leakage of combustible gases (CNG, LPG) and dangerous concentrations of carbon monoxide (CO)
• detection and signalling of exceeding alarm thresholds of gas concentration,
• automatic closing of the gas shut-off valve,
• automatic activation of outputs to external signalling and control devices
• monitor of the status of external devices,
• automatic control of internal circuits,
• digital transmission of information to the POLON 6000 fire alarm system.

The CDG 6000 control panel is equipped with
• 1 detection line allowing the connection of up to 16 addressable gas detectors, type PSG-6000, • 4 relay outputs for controlling external signaling or executive devices, • 1 output to control the gas shut-off valve, • 4 monitoring lines for the status of controlled external devices, • output to supply external devices or gas detectors with a load capacity of 0.5 A / 12 V.

The CDG 6000 control panel can cooperate with the following addressable detectors of the PSG-6000 type:

DetectorDetected gasExternal DC power supply
PSG-6001CNG (natural gas-methane)9 V ÷ 30 V DC
PSG-6002LPG (propane-butane)9 ÷ 30 V DC
PSG-6003CO (carbon monoxide)9 ÷ 30 V DC
PSG-6103CO (carbon monoxide)Only from the surveillance line
specifikáció:
  • Main supply voltage 230 VAC
  • Backup power supply 12 V / 2.3 Ah battery
  • Maximum supply current 150 mA
  • Current drawn from the batteries during the stand-by (control panel) <100 mA
  • POLON 6000 system addressable detection line current consumption <0,6 mA
  • Maximum number of detectors in a detection line 16
  • Relay Outputs potential free in the control panel : 4
    load capacity 8 A / 250 VAC, 8 A / 30 VDC
  • Cut-off valve control output 12 V / 11 A
  • Number of detection lines 1
  • Number of detection lines 4
  • External power supply line 0,5 A / 12 V DC
  • Operating temperature range -10 °C up to +55 °C