DUR-40Ex - Conventional, optical smoke detector - intrinsically safe

The DUR-40Ex optical smoke detector is designed to identify visible smoke generated in flameless initial stage of a fire, when the material begins to smolder, i.e. generally long before the appearance of an open flame and a noticeable temperature increase. It is designed to operate in confined spaces where smoke, dust and condensation are usually unpresent. Thanks to an analogue compensation for environmental changes, it is characterized by increased resistance to changes in pressure, temperature and humidity. DUR-40Ex is an intrinsically safe detector designed for installation in explosion hazard zones.

Variety
Conventional, optical smoke detector – intrinsically safe

Application:
The DUR-40Ex optical smoke detector is designed for detection of a visible smoke at a start of a fire’s flameless stage. The detector is installed behind a proper spark proof separator in explosion hazard areas. In the moment of fire hazard the detector transmits an alarm signal to the fire alarm control panel

Compatibility:

The DUR-40EX detectors can operate in  lines/loops of the IGNIS 1000 or on the side line of ADC-4001M adapter in POLON 4000 fire alarm control panels.

specifikáció:
  • Type conventional, point
  • Category Regular working conditions
  • Variety smoke
  • Operational voltage 12 VDC - 28 VDC
  • Quiescent current consumption ≤ 60 µA
  • Current consumption in alarm mode 20 mA
  • Detector class II 2G Ex ib II C T6 Gb
  • Detected test fires TF1 to TF5 and TF8
  • Addressing conventional detector without addresses
  • Operating temperature range -20 °C to 55 °C
  • Relative humidity up to 95 % at 40 °C
  • Dimensions of detector with base Ф115 x 54 mm
  • Weight 0.15 kg
  • Frame colour black