TOP-40 - Multi-sensor heat and flame detector

The TOP-40 multi- sensor heat and flame detector is designed to identify and signal the source of a fire characterized by an increase in temperature and flame or increase in temperature only. The use of temperature and infrared radiation sensors increases the detector's resistance to interference and minimizes the possibility of false alarms.

Variety

Conventional heat and flame detector

Application:
The heat sensor is a thermistor, which reacts to the rise of temperature occurring during the first stage of a fire. At the time of the simultaneous detection of both the increase in temperature and flame detector transmits an alarm signal to the fire alarm control panel. The use of two sensors eliminates the possibility of false alarms and allows the use of detectors in areas where due to the amount of dust or dirt that was not previously possible.

Compatibility:
The TOP-40 detectors can operate in  lines/loops of the IGNIS 1000 or on the side line of ADC-4001M adapter in POLON 4000 fire alarm control panels.

specifikáció:
  • Type conventional, multisensor, point
  • Category Regular working conditions
  • Variety Heat and flame
  • Operational voltage 9 VDC - 28 VDC
  • Quiescent current consumption ≤ 90 µA
  • Current consumption in alarm mode 20 mA
  • Detector class A1R acc. to PN-EN 54-5 and 2 PN-EN 54-10
  • Detected test fires TF1 to TF5 and TF8
  • Addressing conventional detector without addresses
  • Operating temperature range -20 °C to +55 °C
  • Relative humidity up to 95 % at 40 °C
  • Dimensions of detector with base Ф115 x 71 mm
  • Weight 0.2 kg
  • Frame colour white/any colour of the RAL palette (special order only)
  • Other parameters Viewing range - max 17 m (2 sensitivity class), IR detector viewing range - 60⁰