ROP-63H - Manual call point - hermetic version

ROP-63H Fire manual call point is intended for manual activation of the fire alarm system by a person who has noticed a fire hazard. The warning device is activated in two stages : hitting the safety glass and pressing the button. Manual call points are manufactured for installation inside plaster. Installation of device requires the RM-60-R masking frame.

Variety

Conventional, outdoor, leak-proof.

Application

The ROP-63 manual call points are designed to send information about a fire to the interoperating fire alarm control panel by a person who notices the fire and manually initiates the call point. The manual call points are actuated two-stages, after striking or firmly pressing the protective glass and pressing the alarm button. The manual call points are designed for semi-flush installation, while a special RM-60-R masking frame is applied for surface mounting installation

Compatibility

Manual call points can only operate on the control lines of IGNIS 1000/2000 fire alarm control panels.

Build

The ROP-63M and ROP-63H manual call points have a housing made of red plastic. additionaly equipped with a transparent glass made of non-breakable plastic.

specifikáció:
  • Type non-addressable
  • Activation type type B
  • Frame IP rate IP 55
  • Operational voltage 12 VDC - 30 VDC
  • Operating temperature range -40 °C to +70 °C
  • Conductor diameter 0.8 ÷ 1.2 mm
  • Flush-mounted opening diameters Ф 80 x 22 mm
  • Frame colour red
  • Dimensions 102 x 98 x 46 mm
  • Surface-mounted frame dimensions RM-60-R