SAW-6101 - Conventional acoustic sounder

The SAW-6101 conventional sounders are designed for acoustic signalization of fire in tone.

Overview

Conventional acoustic sounder SAW-6101 is designed for acoustic signalization of fire in tone. There is a possibility of acoustic synchronization of several sounder working in one acoustic area. Device is dedicated for operation with all type of control panels with appropriate power supply output.

Design

Electronic circuits with piezoelectric sounder are fitted into red housing made with flame retardant material. The sounder is installed in G-40S base which is made with the same material and is a part of the sounder kit. There is a screwless connector inside the base for connection of wires. Device has 6 connectors: 2x power supply , 2x synchronization and 2x optional external switch for switching off the sounder.

specifikáció:
  • Type tone, acoustic, low current
  • Version conventional
  • Mounting internal
  • Supply voltage 9,6 VDC ÷ 30.0 VDC
  • External power unit supply voltage 9,6 VDC ÷ 30.0 VDC
  • Current consumption from external power supply ≤50 mA in signaling state with 24 VDC power supply
  • Current consumption from external power supply ≤100 mA in signaling state with 12 VDC power supply
  • Sound level up to 103 dB
  • Operating temperature range -25 °C to +55 °C
  • Frame IP rate IP 21C
  • Dimensions (without socket) Ф 115 x 59 mm
  • Weight (excluding socket and battery) 0.20 kg