ACR-4001 - Radio detector adapter

The ACR-4001 adapter is a linear element that control the datio detectors. Device is instaled in addressable detection loop. Fire alarm identified by a radio detector is transmitted via the adapter to the control panel, and the adapter's LED indicates the alarm with red flashes. Radio detector fault and lack of communication with detector is also transmitted to the control panel - the LED than flashes a yellow light.

Variety

Radio detector adapter

Application

It allows to connect radio detectors or radio manual call points (seen from the control panel as a branch of the detection line) to the addressable loop/detection line of the fire alarm control panel.

Compatibility

Radio detector adapters are installed on the control lines of POLON 3000/4000/6000 control panels.

specifikáció:
  • Radio frequency operating range 868 - 870 MHz pasma f, k
  • Maximum radiated power < 5 mW
  • Operational voltage 16,5 VDC - 24 VDC
  • Stabilization of the frequency method frequency synthesizer, quartz resonator
  • Radio communication type Multichannel confirmation
  • Range (depends form the environment damping) up to 100 m
  • Modulation type FSK
  • Antenna type integrated
  • Maximum quiescent current 6 mA
  • The number of assigned elements 16 DUR-4047 radio detectors
  • Operating temperature range -25 °C to 55 °C
  • Relative humidity up to 95 % at 40 °C
  • Dimensions (without base) (mm) Ø 115 x 133 mm
  • Weight 0.13 kg
  • Frame colour white/any colour of the RAL palette (special order only)