SAW-6001 - Addressable acoustic sounder

Addressable acoustic sounders SAW-6001 are designed for acoustic signalization of fire with tones. They are dedicated for operation in addressable detection lines of POLON 3000/4000/6000.

Overview

The SAW-6001 addressable sounder is designed for acoustic signalization of fire with tones. Device is dedicated for operation on addressable detection lines of POLON 3000/4000/6000. They are activated by signal sent from the control panel, when the programmed triggering criteria are met, e.g. when fire detected in particularzone, general alarm etc.

Design

Electronic circuits with piezoelectric sounder are fitted into red housing made with flame retardant material. Inside the housing there is a place to put and connect 9 V battery. The sounder is installed in G-40S base which is made with the same material and is part of the detectors kit. There is a screwless connector inside the base for connection of wires. There is six connectors: two pairs marked as “+” and “-“ for connection of detection loop (input and output) and two for optional external power supplier.

specifikáció:
  • Type tone, acoustic, low current
  • Version addressable
  • Mounting internal
  • Supply voltage 9.6 VDC ÷ 32.0 VDC
  • Detection line operating voltage 16.5 VDC ÷ 24.6 VDC
  • External power unit supply voltage 9.6 VDC ÷ 32 VDC
  • Battery current consumption ≤150 mA in signaling state
  • Current consumption from external power supply ≤50 mA in signaling state with 24 VDC power supply
  • Current consumption from external power supply ≤100 mA in signaling state with 12 VDC power supply
  • Sound level up to 103 dB
  • Operating temperature range -25 °C to +55 °C
  • Frame IP rate IP 21C
  • Dimensions (without socket) Ф 115 x 59 mm
  • Weight (excluding socket and battery) 0.20 kg
  • Other parameters Operating time from 6LR61 batteries during alarming - min 3h,
    Surveillance operating time from 6LR61 batteries - from 2 to 5 years