SAB-3001 - Addressable Sounder Beacon

The SAB-3001 Addressable Sounder Beacon is designed for acoustic and optical fire signaling in a tone. Device operates on addressable lines/loops of POLON 3000 fire alarm systems.

Purpose

The SAB-3001 addressable sounders are designed for acoustic and optical fire signaling in a tone.. They operate on addressable lines/loops of POLON 3000 fire alarm control panels. Device is activated at the signal sent by the control panel when the programmed triggering criteria are met, e.g. when a fire is detected in the selected supervisory zone.

For proper operation the component requires two supply voltages simultaneously:
– From the detection line
– From an external power supply.

Design

The essential part of the siren is a piezoelectric transducer used to produce an acoustic signal and an LED with a lens located on the top of the siren. The entire unit is mounted in a housing similar to the Series 40 detector. To mount the siren on the ceiling or wall, use the G-40S socket made of flame retardant plastic – supplied with the siren. There is a screwless terminals connector – placed in the socket – for joining the installation wires The connector has six terminals, two pairs labeled “+” and “-” as the input and output of the detection line and two terminals for connecting an external 24 V power supply.

specifikáció:
  • Type tone, optical, acustic, low current
  • Version addressable
  • Mounting internal
  • Supply voltage 9,6 VDC ÷ 30.0 VDC
  • Detection line operating voltage 16.5 VDC ÷ 24.6 VDC
  • External power unit supply voltage 9,6 VDC ÷ 30,0 VDC
  • Current consumption from external power supply ≤ 170µA with 24 VDC supply with 24 VDC supply
  • Current consumption from external power supply ≤280 mA in signaling mode at 12 VDC supply
  • Sound level up to 103 dB
  • flashing frequency 0,5 Hz
  • flash time 0,2 s
  • Operating temperature range -25 °C to +55 °C
  • Frame IP rate IP 21C
  • Dimensions (including socket) Ф 115 x 94 mm
  • Weight (including socket) 0,26 kg